What to do when your toilet overflows?

Diagnosing the cause of the overflow and dealing with it may be a job for a professional.

However, the first order of business — which anyone can carry out — is to halt the flow of sewage from the toilet to the floor:

  • Immediately remove the toilet tank lid – set it aside carefully, don’t knock it on the floor.
  • Don’t waste time moving towels and such to soak up the overflow — stopping the overflow is the top priority.
  • Reach inside the toilet tank and push down the flapper valve (rubber valve in the center of the bottom of the toilet tank) that lets the tank empty water into the toilet bowl. This will halt water entering the toilet bowl from the toilet tank.
  • Remember: the water in the toilet tank is just water — the water in the toilet bowl is sewage.
  • Lift the float that operates the toilet tank fill valve. This will halt the filling up of the toilet tank.
  • If the water level in the toilet bowl slowly drops after you perform the above steps, just keep on holding the toilet tank float up in its highest position until the water level returns to normal.
  • If, on the other hand, the water level in the toilet bowl shows no sign of dropping, continue to hold up the toilet tank float while you close the toilet supply valve — it should be near the floor or at the wall behind the toilet.
  • If the toilet supply valve is hard to turn do not force it. It could break and leave you a terrible supply leak on top of your overflow problem.
  • If you can’t close or locate the toilet fill valve, remove the little flexible rubber or plastic tube that is sending water into the toilet bowl through the vertical standpipe.

Congratulations, you halted your toilet overflow! Now is the time to call a professional company to clean up any sewage spill and to identify and remedy the root cause of the overflow. It might be a blocked drain or pipe in your own home, a blocked main drain, a non-functional sewage ejector/septic pump or even a problem with your septic tank.

Whatever it is, rest assured, we’ll be able to fix it!


Got any questions? Contact us

How do I stop my toilet from overflowing?

The flush valve

First of all, familiarize yourself with the flush valve overflow pipe, as it is the most critical safety feature of your toilet.

  • It is a critical safeguard against water exiting the toilet tank.
  • If your toilet fill valve does not shut off completely at the end of a flush cycle, the overflow pipe is designed to transfer the overflow from the toilet tank to the toilet bowl.
  • Set the height of the overflow pipe at least one inch below the opening of the tank lever (not the tank top), in order to provide the necessary safety margin for the overflow.

How To Unclog A Toilet Without A Plunger – Causes Of An Overflowing Toilet

The fill valve

  • Proper adjustment of the height of the fill valve in relation to the overflow pipe will ensure the toilet cannot siphon water from the tank back into the water supply and also defines the water level in the tank and the bowl.
  • The Critical Level Mark (Indicated with the letters CL on the fill valve) of the fill valve should be placed 1 inch above the top of the overflow pipe.
  • When the fill valve height is set correctly it is possible for the top of the valve to be positioned above the rim of the tank.
  • This is normal in most applications and will still allow the tank lid to fit properly on the toilet tank.


Got any questions? Contact us